[ubermenu config_id="main" menu="126"]

Systems for Projects

Water Systems

[popuppress id=”19048″] [popuppress id=”19049″] [popuppress id=”19050″]
Total-16 Clypso System Metro Rail
Perfect for renovation projects and off-plan installations of Underfloor Heating, adding only 16mm to the floor build up.
Designed for use within floating screeded floors. Typically, it does not affect the depth of a floors construction. Designed for use within either a floating or a bonded screed floor.
pdf  Technical Specification Sheet

pdf  Technical Drawing (Timber) | pdf  Technical Drawing (Concrete)

View Product ❯

pdf  Technical Specification Sheet

pdf  Technical Drawing

View Product ❯

pdf  Technical Specification Sheet

pdf  Technical Drawing

View Product ❯

[popuppress id=”19051″] [popuppress id=”19052″] [popuppress id=”19053″]
Tectora Joisted Nexxa Panel Silva Joisted
Particularly suitable where there is a sprung/cradled battened floor or floor joists.
Flexible, lower build height system used primarily where there are floor build-up issues to deal with. Designed for use within either battened or suspended timber floors that are constructed using traditional joists.
pdf  Technical Specification Sheet

pdf  Technical Drawing (Timber) | pdf  Technical Drawing (Concrete)

View Product ❯

pdf  Technical Specification Sheet

pdf  Technical Drawing

View Product ❯

pdf  Technical Specification Sheet

pdf  Technical Drawing

View Product ❯

[popuppress id=”19054″] [popuppress id=”19055″] [popuppress id=”19056″]
Econna Joisted Contura Floating Forte Grid
Designed for use over both battened and joisted floors, leaving the void between them free for other services.
Contura Floating floor system is used where heating is installed onto a concrete or solid wooden subfloor. The logical choice for reinforced concrete and screed floors with the pipe tied to the steel reinforcement.
pdf  Technical Specification Sheet

pdf  Technical Drawing

View Product ❯

pdf  Technical Specification Sheet

pdf  Technical Drawing (Timber) | pdf  Technical Drawing (Concrete)

View Product ❯

pdf  Technical Specification Sheet

pdf  Technical Drawing

View Product ❯

Water Components

underfloor heating manifold underfloor heating pipe for water heating systems warmup water system control center water system underfloor insulation
Manifold Pipes Control Center Insulated Underlay
The Warmup Manifold is manufactured from stainless steel and provides water regulation for up to twelve underfloor heating circuits. Warmup systems come with a choice of 3 pipe types; PEX-A, PE-RT and PE-RT/AL/PE-RT. This choice guarantees that you have the best possible system, tailored to your specific installation and budget. The Control Centre is designed to work with the thermostats and heat source, such as a boiler. A thin polystyrene insulation barrier with effective acoustic properties to reduce contact noise. To be used with Foil Heater System.
pdf-128  Technical Specification

View Product ❯

pdf Technical Specification Sheet:PEX-a Pipe
pdf Technical Specification Sheet:AL/PE-RT PIPE
View Product ❯
pdf Technical Specification Sheet

View Product ❯

pdf Technical Specification Sheet
pdf Technical Specification SheetView Product ❯

 

Electric Systems

[popuppress id=”19037″] [popuppress id=”19039″] [popuppress id=”19041″] [popuppress id=”19043″]
Sticky Mat Loose Wire Foil Heater Inscreed Cable
Electric underfloor heating mat with pressure sensitive adhesive for the fastest installation
The Loose Wire System is designed for use within the adhesive layer under tiles or within a levelling compound under other floor finishes. Electric system designed for use with laminate, carpet, vinyl, wood, and other floating floors Inscreed heaters, 50mm floor build, are excellent for simple installation within screeded floors of any size.
pdf  Technical Specification Sheet

pdf  Technical Drawing

View Product ❯

pdf  Technical Specification Sheet

pdf  Technical Drawing

View Product ❯

pdf  Technical Specification Sheet

pdf  Technical Drawing

View Product ❯

pdf  Technical Specification Sheet

pdf  Technical Drawing

View Product ❯

[popuppress id=”19045″]
DCM-PRO
DCM-PRO is the fastest solution for the installation of a heated decoupling system in all areas, installing electric underfloor heating in minutes with less tile adhesive.
pdf  Technical Specification Sheet

pdf  Technical Drawing

View Product ❯

Electric Components

underfloor heating insulation boards overlay underfloor heating underlay for underfloor heating
Insulation Boards Dual Overlay Insulated Underlay
Using Insulation Boards with floor heating significantly reduces the heat-up times and running costs.
Dual Overlay is a free-floating subfloor for use with carpet, vinyl, and linoleum floor finishes. A thin polystyrene insulation barrier with effective acoustic properties to reduce contact noise. To be used with Foil Heater System.
pdf-128  Technical Specification

View Product ❯

pdf Technical Specification Sheet

View Product ❯

pdf Technical Specification Sheet

View Product ❯

 

Bathroom Collection

Mirror Demister Heated Towel Rails Wall Heater
Mirror demisters offer a safe and easy way to keep mirrors steam free.
Our electric heated towel rails are beautifully designed in the highest quality stainless steel. There are no liquids inside, so are maintenance-free and incredibly cheap to run. Perfect if you wish to extend the luxury of the floor heating to the walls.
pdf-128  Technical Specification pdf-128  Technical Specification pdf-128  Technical Specification

Outdoor Heating

Self-Regulating Cable Snow Melting Cables Patio Heater
The Warmup Self-Regulating Cable protects against dangerous build-up of snow and ice on roofs, within gutters and downpipes and prevents pipes from freezing
The Warmup Snow Melting Cables protect against snow and ice build-up over both concrete and asphalt surfaces to improve accessibility and avoid accidents Patio heaters are the perfect choice for outdoors in courtyards, conservatories and gardens

Controls

Thermostats

Stick Mat
[popuppress id=”19037″]
Sticky Mat

Electric underfloor heating mat with pressure sensitive adhesive for the fastest installation.

pdf  Technical Specification Sheet
pdf  Technical Drawing

View Product ❯

Loose Wire
[popuppress id=”19039″]
Loose Wire

The Loose Wire System is designed for use within the adhesive layer under tiles or within a levelling compound under other floor finishes.

pdf  Technical Specification Sheet
pdf  Technical Drawing

View Product ❯

Foil Heater
[popuppress id=”19041″]
Loose Wire

The Loose Wire System is designed for use within the adhesive layer under tiles or within a levelling compound under other floor finishes.

pdf  Technical Specification Sheet
pdf  Technical Drawing

View Product ❯

Inscreed Cable
[popuppress id=”19043″]
Inscreed Cable

Inscreed heaters, 50mm floor build, are excellent for simple installation within screeded floors of any size.

pdf  Technical Specification Sheet
pdf  Technical Drawing

View Product ❯

DCM-PRO
[popuppress id=”19045″]DCM-PRO

DCM-PRO is the fastest solution for the installation of a heated decoupling system in all areas, installing electric underfloor heating in minutes with less tile adhesive.

pdf  Technical Specification Sheet

pdf  Technical Drawing

View Product ❯

Electric Components

Insulation Boards

Using Insulation Boards with floor heating significantly reduces the heat-up times and running costs.

pdf-128  Technical Specification View Product ❯


Dual Overlay

Dual Overlay is a free-floating subfloor for use with carpet, vinyl, and linoleum floor finishes.

pdf Technical Specification Sheet View Product ❯


Insulated Underlay

A thin polystyrene insulation barrier with effective acoustic properties to reduce contact noise. To be used with Foil Heater System.

pdf Technical Specification Sheet View Product ❯

Total-16
[popuppress id=”19048″]
Total-16

Perfect for renovation projects and off-plan installations of Underfloor Heating, adding only 16mm to the floor build up.

pdf  Technical Specification Sheet
pdf  Technical Drawing (Timber) | pdf  Technical Drawing (Concrete)

View Product ❯

Clypso System
[popuppress id=”19049″]
Clypso System

Designed for use within floating screeded floors. Typically, it does not affect the depth of a floors construction.

pdf  Technical Specification Sheet
pdf  Technical Drawing

View Product ❯

Metro Rail
[popuppress id=”19050″]
Metro Rail

Designed for use within either a floating or a bonded screed floor.

pdf  Technical Specification Sheet
pdf  Technical Drawing

View Product ❯

Tectora Joisted
[popuppress id=”19051″]
Tectora Joisted

Particularly suitable where there is a sprung/cradled battened floor or floor joists.

pdf  Technical Specification Sheet
pdf  Technical Drawing (Timber) | pdf  Technical Drawing (Concrete)

View Product ❯

Nexxa Panel
[popuppress id=”19052″]
Nexxa Panel

Flexible, lower build height system used primarily where there are floor build-up issues to deal with.

pdf  Technical Specification Sheet
pdf  Technical Drawing

View Product ❯

Silva Joisted
[popuppress id=”19053″]
Silva Joisted

Designed for use within either battened or suspended timber floors that are constructed using traditional joists.

pdf  Technical Specification Sheet
pdf  Technical Drawing

View Product ❯

Econna Joisted
[popuppress id=”19054″]
Econna Joisted

Designed for use over both battened and joisted floors, leaving the void between them free for other services.

pdf  Technical Specification Sheet
pdf  Technical Drawing

View Product ❯

Contura Floating
[popuppress id=”19055″]
Contura Floating

Contura Floating floor system is used where heating is installed onto a concrete or solid wooden subfloor.

pdf  Technical Specification Sheet
pdf  Technical Drawing (Timber) | pdf  Technical Drawing (Concrete)

View Product ❯

Forte Grid
[popuppress id=”19056″]
Forte Grid

The logical choice for reinforced concrete and screed floors with the pipe tied to the steel reinforcement.

pdf  Technical Specification Sheet
pdf  Technical Drawing

View Product ❯

Water Components

Manifold

The Warmup Manifold is manufactured from stainless steel and provides water regulation for up to twelve underfloor heating circuits.

pdf-128  Technical Specification

View Product ❯


Pipes

Warmup systems come with a choice of 3 pipe types; PEX-A, PE-RT and PE-RT/AL/PE-RT. This choice guarantees that you have the best possible system, tailored to your specific installation and budget.

pdf Technical Specification Sheet:PEX-a Pipe
pdf Technical Specification Sheet:AL/PE-RT PIPE

View Product ❯


Control Center

The Control Centre is designed to work with the thermostats and heat source, such as a boiler.

pdf Technical Specification Sheet

View Product ❯


Insulated Underlay

A thin polystyrene insulation barrier with effective acoustic properties to reduce contact noise. To be used with Foil Heater System.

pdf Technical Specification Sheet
pdf Technical Specification Sheet

View Product ❯

Mirror Demister

Mirror Demister

Mirror demisters offer a safe and easy way to keep mirrors steam free.

pdf-128  Technical Specification

Heated Towel Rails

Heated Towel Rails

Our electric heated towel rails are beautifully designed in the highest quality stainless steel. There are no liquids inside, so are maintenance-free and incredibly cheap to run.

pdf-128  Technical Specification

Wall Heater

Wall Heater

Perfect if you wish to extend the luxury of the floor heating to the walls.

pdf-128  Technical Specification

Mirror Demister

Self-Regulating Cable

The Warmup Self-Regulating Cable protects against dangerous build-up of snow and ice on roofs, within gutters and downpipes and prevents pipes from freezing.

Snow Melting Cables

Snow Melting Cables

The Warmup Snow Melting Cables protect against snow and ice build-up over both concrete and asphalt surfaces to improve accessibility and avoid accidents.

Patio Heater

Patio Heater

Patio heaters are the perfect choice for outdoors in courtyards, conservatories and gardens.

Thermostats
Have any questions?